Yamaha Application Chart
Brake light Flasher Headlight Modulator Running Light Flasher Electrical Lighting Support INFO

These tables are provided for reference only.
We are trying to assist you in finding the correct part. However, we depend on you to determine what's in your motorcycle.
For example, if you order a part to cancel a turn signal but your bike is computer operated rather than using a flasher then it won't work.
No matter how hard we try it's not possible for us to know how each and every motorcycle on the road is equipped.
We are trying to help the best we can by offering information we have received. Most of this is correct but we're not able to verify everything we are told.

For HEADLIGHT MODULATORS, please check your bike to confirm the headlight bulb type -
We are not able to verify the accuracy of every model on this list because the manufacturers sometimes make changes between the model years and we often rely on customer feedback. The manufacturers don't offer a complete listing of the bulbs installed in all of their models. Your owners manual provides the most accurate information in most cases to help you determine the type of bulb used in your headlight. You can also inspect the motorcycle using the "Bulb ID" information linked next to the checkmark or contact the parts department of the dealer who sold you the motorcycle.

 

Note: U.S. models are shown. Foreign models may be subject to changes to meet country requirements.
yamaha logo
kriss help manClick on part number for the link to each information page. The prices are shown on each page.
If you don't find your model this doesn't mean your bike is not supported, we just can't list every bike on the road.
If you find an error or missing model in our list please notify us so it can be corrected or added.
Headlight modulator note - If your motorcycle uses the 12 volt H4 bulb (3 prong) this unit works on your headlight.
Fits these Models
(See small lights below)
Headlight
bulb
Double
Eagle

Modulator
Freedom
Brake
Flasher
Panther
Running Light
unit for rear
signals
Panther
Multi-function
brake & signal units
Hazard
Flasher
Turn Signal
Cancel
Driving
Light
Controller
Trailer
connections
/Accessories
Royal Star - all models
Single H4 bulb
Road Star - all models
Single H4 bulb
Royal Star Venture
Single H4 bulb
V Star
Single H4 bulb
V Star 650 (2007)
Single H4 bulb
Factory installed
V Max - Small housing, uses Kriss short plug model.
Single H4 bulb
(custom)
Venture Royal (touring)
Single H4 bulb
Virago - single light models
Single H4 bulb
Virago 250
Single H4 bulb
YZF-600R
Single H4 bulb
2004 FZ6
H4 bulb
( High beam)
Venture Tour (1980's)
Single H4 bulb
Headlight modulator note - Dual H4 Bulb (3 prong)
FZ1
Dual H4 bulbs
FJR1300
Dual H4 bulbs
Fits these Models
Headlight
bulb
Double
Eagle

Modulator
Illuminator (Make both low and high beam operate together)
Freedom
Brake
Flasher
Panther
Running Light
unit for rear
signals
Panther
Multi-function
brake & signal units
Hazard
Flasher
Turn Signal
Cancel
Driving
Light
Controller
Trailer
connections
/Accessories
Headlight modulator note - If your motorcycle uses the 12 volt H1/H3/HB3/H7/H9/H11 etc. bulbs this unit works on your headlight.
**H(x) bulbs other than standard H7 require the use of our simple crimp connectors (free when selected on the order form). See product page for details.
Roadliner/Stratoliner
2006-2007
high beam is
H(x)
YZF-R6 (4 bulbs)
Dual high H7 bulbs
YZF-R1 (4 bulbs)
Dual high H7 bulbs
turn signal cancel unit see limitations found on cancel unit web page
We cannot assure the turn cancel unit can be connected to some bikes. The installer needs to verify the bike has an accessible signal flasher unit before making purchase.
(Call us if you need instructions or help identifying a signal flasher)



If you have a 7" diameter headlight or the headlight is installed in a front fairing this information does not apply.
kriss box
Unit size
1.5" x 1.5" x .75"
If you're not sure about space availability in the headlight you can shape a piece of styrofoam or wood the size of the unit. Place this inside the housing behind the reflector. If the headlight closes properly then you have adequate space to install the modulator.  
Some Models with 5 3/4" headlight may not have enough space inside to contain the original plug plus a modulator. In these rare cases use our alternate mounting procedure, which still allows direct plug in inside the headlight.This can be viewed at 5 3/4" Alternate Install to the right.
Please allow time for adobe file
to display after it's fully loaded.

 

© Kriss 1986-2008 all rights reserved
Kriss and Kriss brandmarks are trademarks of Kriss Industries Inc.