Victory motorcycles application table

These tables are provided for reference only.
We are trying to assist you in finding the correct part. However, we depend on you to determine what's in your motorcycle.
For example, if you order a part to cancel a turn signal but your bike is computer operated rather than using a flasher then it won't work.
No matter how hard we try it's not possible for us to know how each and every motorcycle on the road is equipped.
We are trying to help the best we can by offering information we have received. Most of this is correct but we're not able to verify everything we are told.

For HEADLIGHT MODULATORS, please check your bike to confirm the headlight bulb type -
We are not able to verify the accuracy of every model on this list because the manufacturers sometimes make changes between the model years and we often rely on customer feedback. The manufacturers don't offer a complete listing of the bulbs installed in all of their models. Your owners manual provides the most accurate information in most cases to help you determine the type of bulb used in your headlight. You can also inspect the motorcycle using the "Bulb ID" information linked next to the checkmark or contact the parts department of the dealer who sold you the motorcycle.

Note: U.S. models are shown. Foreign models may be subject to changes to meet country requirements.

	Click on part number for the link to each information page. The prices are shown on each page. If you don't find your model this doesn't mean your bike is not supported, we just can't list every bike on the road. If you find an error or missing model in our list please notify us so it can be corrected or added.
Headlight modulator note - All Victory motorcycles use the 12 volt H4 bulb (3 prong) so this unit works on your headlight. We recommend using our modulator built to fit the Harley-Davidson. The part number is shown below.
Fits these Models	Headlight bulb	Double Eagle Modulator **	Freedom Brake Flasher	Panther Running Light unit for rear signals	Panther Multi-function brake & signal units		Hazard Flasher	Turn Signal Cancel	Driving Light Controller	Trailer connections /Accessories
Most models	Single bulb H4	H45003	BL3012	RL5000	BT5500	BM6000	HF5005	TS5007	DL7000	TI6002

Fits these Models	Headlight bulb	Double Eagle Modulator **	Illuminator (Make both low and high beam operate together)	Freedom Brake Flasher	Panther Running Light unit for rear signals	Panther Multi-function brake & signal units		Hazard Flasher	Turn Signal Cancel	Driving Light Controller	Trailer connections /Accessories
Headlight modulator note - If your motorcycle uses 12 volt H1/H3/HB3/H7/H9/H11 etc. (2 prong) bulbs this unit works on your headlight. **H(x) bulbs other than standard H7 require the use of our simple crimp connectors (free when selected on the order form). See product page for details.
Vegas - 2002 up	high beam is H(7)	H75001	H77000	BL3012	RL5000	BT5500	BM6000	HF5005	See reqd	DL7000	TI6002
Kingpin - 2002 up	high beam is H(7)	H75001	H77000	BL3012	RL5000	BT5500	BM6000	HF5005	See reqd	DL7000	TI6002
Hammer - 2002 up	high beam is H(7)	H75001	H77000	BL3012	RL5000	BT5500	BM6000	HF5005	See reqd	DL7000	TI6002

turn signal cancel unit see limitations found on cancel unit web page
We cannot assure the turn cancel unit can be connected to some bikes. The installer needs to verify the bike has an accessible signal flasher unit before making purchase.
(Call us if you need instructions or help identifying a signal flasher)

Victory models with the stock LED brake light bulb use a low voltage brake light circuit for the LED bulb. Please contact us when you are installing our unit and we will explain specifically where to find the 12 volt connection point for the brake circuit.