 |
 |
|
 |
||||||||
|
|
|
|
|
|
|
|
 |
 |
|
|
If your newer model is not shown in our table it's still covered by one of our products. |
  Double Eagle Headlight ModulatorsIf you don't find your model this doesn't mean your bike is not supported, the list is too long to include every bike on the road. If you find an error or missing model in our list please contact us so it can be corrected or added. Some years are shown for reference while other years usually still apply |
||||||||||||||||||||
|
|
|||||||||||||||||||
Headlight modulator below note - If your motorcycle uses the 12 volt H4 bulb (3 prong) the item below works on your headlight. |
|||||||||
|
Fits these Models |
Headlight
bulb (shown for ref.) |
Double
Eagle Modulator |
Freedom
Brake Flasher |
Panther
503 Running Light unit for rear signals |
Panther
557 Multi-function brake & signal unit |
Hazard
Flasher |
Turn Signal
Cancel  |
Driving
Light Controller |
Trailer
connections /Accessories |
| VULCAN - Most models |
One H4 bulb
(2 filaments) |
||||||||
| Concours (prior 2008) |
One H4 bulb
(2 filaments) |
||||||||
| Voyager |
One H4 bulb
(2 filaments) |
||||||||
| Voyager XII |
One H4 bulb
(2 filaments) |
||||||||
| Ninja Single headlights |
One H4 bulb
(2 filaments) |
||||||||
| ZZR75 |
One H4 bulb
(2 filaments) |
||||||||
| ZZR1200R |
One H4 bulb
(2 filaments) |
||||||||
| ZX-10 |
One H4 bulb
(2 filaments) |
||||||||
| 2000 NINJA ZX500 |
One H4 bulb
(2 filaments) |
||||||||
| KLR650 (see below) |
One H4 bulb
(2 filaments) |
||||||||
| Headlight modulator below note - Dual H4 Bulbs (two 3 prong bulbs) | |||||||||
| Concours - 2008 |
Two H4 bulbs
(2 filaments each) |
||||||||
| Ninja ZX-7R & 9R |
Two H4 bulbs
(2 filaments each) |
||||||||
| Ninja ZX-12R |
Two H4 bulbs
(2 filaments each) |
||||||||
| ZZR600 (2005-2007) |
Two H4 bulbs
(2 filaments each) |
||||||||
| ZZR1200 |
Two H4 bulbs
(2 filaments each) |
||||||||
|
Fits these Models
|
Headlight bulb
|
Double
Eagle Modulator |
Freedom
Brake Flasher |
Panther
503 Running Light unit for rear signals |
Panther
557 Multi-function brake & signal unit |
Hazard
Flasher |
Turn Signal
Cancel |
Driving
Light Controller |
Trailer
connections /Accessories |
| Headlight modulator
below note - If your motorcycle uses 12 volt H1/H3/HB3/H7/H9/H11 etc. (2 prong) bulbs the item below works on your headlight. Bulbs other than standard H7 require the use of our simple crimp connectors provided free with the unit. See product page for details. |
|||||||||
| See Illuminator unit for operating H(?) high beam also as a low beam. H7 Illuminator | |||||||||
| KLR650 (2008 - later) |
Single filament high beam bulb
separate from
low beam bulb |
||||||||
| NINJA ZX-6R/RR (2 bulbs) |
Single filament high beam bulb separate from low beam bulb |
||||||||
| Z750S |
Single filament high beam bulb separate from low beam bulb |
||||||||
| NINJA ZX-10R (2 bulbs) |
Single filament high beam bulb separate from low beam bulb |
||||||||
| NINJA 250R - (2 bulbs) |
Single filament high beam bulb separate from low beam bulb |
||||||||
| NINJA 650R - (2 bulbs) |
Single filament high beam bulb separate from low beam bulb |
||||||||
| VERSYS - (2 bulbs) |
Single filament high beam bulb separate from low beam bulb |
||||||||
| Z1000 (2 bulbs) |
Single filament high beam bulb separate from low beam bulb |
||||||||
| Vulcan 2000 |
Single filament high beam bulb separate from low beam bulb |
||||||||
| ZX14 (4 bulbs) - bulb model not shown above | Two single filament high beam bulbs separate from low bulbs |
Not applicable |
Not applicable |
Not applicable |
- |
||||
|
Headlight bulbs vary among make, model and year. If your model or year is not shown then it may be necessary for you to determine how your motorcycle is equipped so that you order the correct item. Most of the time your owners manual lists the type of headlight bulb that's installed or you can often just take a look at the headlight.  We ask that you make sure you know what type of bulb(s) your motorcycle uses as we cannot always assure that our list includes all of the latest models or we've been provided correct information. |
These tables are provided for reference only. We are trying to assist in finding the correct part. However, we depend on you to identify your motorcycle model requirements. No matter how hard we try it's not possible for us to know how each and every motorcycle on the road is equipped. We are trying to help the best we can by offering information we have determined or in some cases have been advised. Most of this is correct but we're not able to verify everything we are told every time. |
turn signal cancel unit see limitations found on cancel
unit web page
We cannot assure the turn cancel unit can be connected
to some bikes. The installer needs to verify the bike has an accessible
signal flasher unit before making purchase.
(Call us if you need instructions or help identifying a signal flasher)
© Kriss 2012 all rights reserved
