Aprilia Application Chart
Motorcycle models Parts type Brake light flasher Headlight modulator Signals Trailer Road lamps Support Info
aprilia logo

aprilia rsv1000
aprilia sr50

 

If you're not sure which modulator to choose please compare your motorcycle with these pictures.
H4
H7
Roll over reference picture for simulation
If you see me your browser window is too large for the proper alignment of information screens.

Click on your browser window button which should decrease the size. Then grab the right border and move until the sides are lined up correctly.
Click here to adjust the size.

If your newer model is not shown in our table it's still covered by one of our products.
kriss help manDouble Eagle Headlight Modulators
If you don't find your model this doesn't mean your bike is not supported, the list is too long to include every bike on the road.
If you find an error or missing model in our list please contact us so it can be corrected or added.
Some years are shown for reference while other years usually still apply
Click on pictures
above or the part
number below for
information page
and ordering.

Headlight modulator below note - If your motorcycle uses the 12 volt H4 bulb (3 prong) the item below works on your headlight.

Fits these Models
Some years are shown for
reference while other years
may still apply
Headlight bulb
Double
Eagle

Modulator
Freedom
Brake
Flasher
Panther
503 Running Light
unit for rear
signals
Panther
557 Multi-function
brake & signal unit
Hazard
Flasher
Turn Signal
Cancel
Driving
Light
Controller
Trailer
connections
/Accessories
ETV1000 - 2002
Two H4 bulbs (2 filaments each)
 
Headlight modulatorbelow note - If your motorcycle uses 12 volt H1/H3/HB3/H7/H9/H11 etc. (2 prong) bulbs the item below works on your headlight.
Bulbs other than standard H7 require the use of our simple crimp connectors provided free with the unit. See product page for details.
See Illuminator unit for operating single filament high beam also as a low beam. H7 Illuminator
SR50
Single filament high beam bulb
separate from
low beam bulb
Atlantic 500 - bulb model not shown above
Two single filament high beam bulbs
separate from
low bulbs
Scarabeo - bulb model not shown above
Two single filament high beam bulbs
separate from
low bulbs

 

Headlight bulbs vary among make, model and year. If your model or year is not shown then it may be necessary for you to determine how your motorcycle is equipped so that you order the correct item. Most of the time your owners manual lists the type of headlight bulb that's installed or you can often just take a look at the headlight.
We ask that you make sure you know what type of bulb(s) your motorcycle uses as we cannot always
assure that our list includes all of the latest models or we've been provided correct information.


These tables are provided for reference only.
We are trying to assist in finding the correct part. However, we depend on you to identify your motorcycle model requirements.
No matter how hard we try it's not possible for us to know how each and every motorcycle on the road is equipped.
We are trying to help the best we can by offering information we have determined or in some cases have been advised.
Most of this is correct but we're not able to verify everything we are told every time.
Note: U.S. models are shown. Foreign models may be subject to changes to meet country requirement

 

turn signal cancel unit see limitations found on cancel unit web page
We cannot assure the turn cancel unit can be connected to some bikes. The installer needs to verify the bike has an accessible signal flasher unit before making purchase.
(Call us if you need instructions or help identifying a signal flasher)

 

© Kriss 2012 all rights reserved