Product Information

Unit size 1.5" x 1.5" x .75"

Are you installing a device to make your rear turn signals operate like brake lights or running lights and have a factory Security Alarm system on your motorcycle. Often you'll find that the alarm system will not function properly or produce a false alarm when you try to arm the system. One good way around this problem is to isolate the signal accessory from the stock wiring. This is required because the stock circuits are monitored for capacitance and adding an accessory to the brake or taillight wiring can trip the alarm when the bike is turned off.

Our Security/Alarm System Isolator removes the added circuit capacitance of signal light accessories when you turn off the ignition switch. This allows normal activation of the alarm system. Using a test light, soldering gun and wire cutters/strippers the job is an easy install.

When purchased with one of our Panther units the isolator will be reduced in price to $19.95
(Must be purchased on the same order)
(Cart will show $29.95 price however the discount will be applied at time of invoicing)